# Need help with Parsoni juniper

**URL:** <https://forum.bonsaimirai.com/t/need-help-with-parsoni-juniper/3617>\
**Category:** Design\
**Created:** [July 2, 2019, 1:26pm UTC](https://forum.bonsaimirai.com/t/need-help-with-parsoni-juniper/3617 "2019-07-02T13:26:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bonsai\_Bentley](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.bonsaimirai.com/bonsai_bentley/32/7792_2.png) [@Bonsai\_Bentley](https://forum.bonsaimirai.com/u/Bonsai_Bentley)\
**Post date:** [July 2, 2019, 1:26pm UTC](https://forum.bonsaimirai.com/t/need-help-with-parsoni-juniper/3617/1 "2019-07-02T13:26:23Z")

</div>

I stopped by an absolutely wretched nursery. This place doesn’t care, but I figured that there may be some neglected gems in there. I found very little, but did come away a couple Parsoni juniper. These need to regain strength before any major work is done, but I figured that I can go ahead and set structure now as long as I don’t make major cuts?

Before cleaning:

 ![IMG-20190701-WA0001](https://canada1.discourse-cdn.com/flex029/uploads/bonsaimirai/original/2X/4/4272d91c4090b8145aee4c4429673b28d8b77b57.jpeg)

After:

 ![IMG_20190701_210629](https://canada1.discourse-cdn.com/flex029/uploads/bonsaimirai/original/2X/f/fd972692ebc6297ba1da4181e159410ee033b367.jpeg)

I’m still looking for the nebari, but as far as styling goes I was thinking a tension design. I’m struggling with what to do with the leader on that apex. Do I use some wire to make the trunk more vertical? I plan on letting all of the branches around the trunk grow/thicken and then Jin them to form a “crown of thorns” sort of thing with the main trunk growing out of the middle.

My wife took the smaller of the two:

 ![IMG_20190701_210759](https://canada1.discourse-cdn.com/flex029/uploads/bonsaimirai/original/2X/b/b3f42778650bc1d49d3c2c351586a2c0fd62b0d4.jpeg)

Not sure what to do with this either other than to tilt it almost 90 degrees and go with a cascading design.

---

<div class="post-metadata">

**Author:** ![Bonsai\_Bentley](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.bonsaimirai.com/bonsai_bentley/32/7792_2.png) [@Bonsai\_Bentley](https://forum.bonsaimirai.com/u/Bonsai_Bentley)\
**Post date:** [July 2, 2019, 1:41pm UTC](https://forum.bonsaimirai.com/t/need-help-with-parsoni-juniper/3617/2 "2019-07-02T13:41:08Z")

</div>

Forgot to mention that the smaller one has that acute bend in it because it was growing on its side lol. That’s the level of idgaf that this place has. 😆
