# First wiring attempt

**URL:** <https://forum.bonsaimirai.com/t/first-wiring-attempt/8159>\
**Category:** Beginners\
**Created:** [April 26, 2021, 1:25am UTC](https://forum.bonsaimirai.com/t/first-wiring-attempt/8159 "2021-04-26T01:25:08Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![MartyWeiser](https://avatars.discourse-cdn.com/v4/letter/m/cc9497/32.png) [@MartyWeiser](https://forum.bonsaimirai.com/u/MartyWeiser)\
**Post date:** [April 28, 2021, 1:28am UTC](https://forum.bonsaimirai.com/t/first-wiring-attempt/8159/21 "2021-04-28T01:28:00Z")

</div>

I was thinking of more side to side curves, particularly in the lower section.

---

<div class="post-metadata">

**Author:** ![bernhard](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.bonsaimirai.com/bernhard/32/15029_2.png) [@bernhard](https://forum.bonsaimirai.com/u/bernhard)\
**Post date:** [April 30, 2021, 7:52am UTC](https://forum.bonsaimirai.com/t/first-wiring-attempt/8159/22 "2021-04-30T07:52:26Z")

</div>

Hello moinudin for the first attempts that is not bad, I would advise you to try to bring the turns at 55 to 60 degrees to the trunk or branch your branches look very good because I can not see it very well in these pictures but when you have the trunk you reach almost 80 degrees so you also get the huge gaps between wire and trunk when bending can also be fooled I don’t see it very well in these pictures you may practice on a cut branch like in the wire videos that helped me a lot Greetings

[Previous page](https://forum.bonsaimirai.com/t/first-wiring-attempt/8159.md?page=1)